How about small loader clutch piston seal inspection?

Today, let's learn about the reasons for the damage of the power shift clutch of the small loader. First, let's look at the piston seal of the clutch. If this problem occurs, you can try the following methods:

When the loader moves or the oil temperature is too high, you need to determine that the clutch piston is not tightly sealed or the oil pressure is low, but the traditional detection method is sometimes difficult to determine the cause of the fault, especially when there is no electricity, it is more difficult to check the assembly of the seal ring and the gearbox assembly. At this time, the pneumatic valve can be used for testing.

Transmission control valve (assembly transmission shall be the control valve before loading), and successively transmit the gas plant with oil hole of 0.6 0.8 MPa. If a hole gas plant is heard, the first and no air or air inlet metering pump, small program between piston and cylinder barrel and well sealed clutch are matched; If you hear the sound of the piston friction clamping block and the air is loud, and then the seal between the clutch piston and the cylinder barrel fails, replace the seal.

I hope the above can help you. Our company is mainly engaged in construction machinery such as small forklifts, small loaders and tippers of various specifications, many precision machining capabilities and high-tech talents. The equipment has strict quality inspection before leaving the factory. If you need to contact us.